DuraLabel LabPRO Guide de l'utilisateur télécharger pdf (Page 61)

14. SYMPTOM: Streaking occurs while printing.

a. Possible Cause: Ribbon was installed with too much slack or it was not

centered, creating a crease in the ribbon.

Solution: Tighten the slack and eliminate all creases in the ribbon.

b. Possible Cause: Printer requires service.

Solution: Contact Graphic Products.

15. SYMPTOM: Speckling occurs while printing.

a. Possible Cause: Print head requires cleaning.

Solution: Use an alcohol cotton swab to clean the print head.

b. Possible Cause: Dust or other surface debris make it difficult for the resin to

stick to vinyl or improperly stored.

Solution: Use only Graphic Products vinyl and store in dust-free conditions.

Contact Graphic Products if problem persists.

-59-

1 2 ... 56 57 58 59 60 61 62 63 64

Pas de commentaire

DuraLabel LabPRO Guide de l'utilisateur Page 61