DuraLabel LabPRO Guide de l'utilisateur télécharger pdf (Page 28)

Black Mark Label Instructions

Black Mark Calibration

In order to print labels with black marks, the label stock needs to be calibrated. To

do so, with the printer power OFF, hold the FEED button down while turning ON the

printer. Release the FEED button while it blinks green-amber.

The LED color will flash as follows: red (5 blinks) amber (5 blinks) then green and

amber will blink alternately. Once this process is complete follow the "Driver Settings

for Black Mark Labels" to change the driver settings.

Driver Settings for Black Mark Labels

For black mark labels with the 1/8" black mark, the settings on the Stock tab should

be as follows: “Method” set to Thermal Transfer, the “Type” set to Labels With

Marks, “Mark Height” set to 0.12 (default) and “Mark Offset” to 0 (default.)

-26-

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

Pas de commentaire

DuraLabel LabPRO Guide de l'utilisateur Page 28