DuraLabel Toro Guide de l'utilisateur télécharger pdf (Page 21)

-19-

Cutter Cleaning

1. Turn the printer power OFF.

2. Remove the screws on both sides of the manual cutter module.

3. Unplug the sensor connector and remove the cutter module.

4. Open a cleaning swab, and place the swab between your index nger and your thumb.

Squeeze the swab until it snaps. Alcohol will be distributed to the cotton side of the swab.

While pressing down on the cutter, run a cleaning swab back and forth several times

across the upper blade on of the back side of the cutter.

5. Run the cleaning swab back and forth several times across the upper blade on the front

side of the cutter.

11. Troubleshooting

For common print errors the Toro screen will prompt you with a graphic screen on the likely

cause of the error and what you can do to x it.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

DuraLabel Toro Guide de l'utilisateur Page 21